My cart
Your cart is empty
Products at cart 0 x 0 руб. Go to cart Checkout

Manual band saw for metal cutting MetalTec BS 170 FHE (220V)

Code: BS 170 FHE (220V)
Manufacturer: MetalTec
Price: 133 299 руб.

Quick order
Model BS 170 FHE (220 V)
Motor power, W 950 (220V)
Saw blade dimensions, mm 2110 x 20 x 0.9
Cutting speed, m/min 65 (220V)
Angle of rotation of the saw frame, ° 0, 30, 45, 60
Section of workpiece at – 90°, mm ●170
■ 140 x 140
▅ 210 x 140
Section of workpiece at -45°, mm ● 120mm
■ 110 x 110mm
▅ 130 x 110mm
Section of workpiece at -60° ● 70mm
■ 60 x 60mm
▅ 170 x 60mm
Table height, mm 970
Dimensions:
Length, mm 1150
Width, mm 560
Height, mm 930
Weight (net), kg 141
Weight (gross), kg 168

Warranty - 1 year.

PURPOSE:

The band saw MetalTec BS 170 FHE is designed for cutting workpieces from metals: non-ferrous, nickel, titanium, as well as high-alloy and structural steels.

The design of the machine is classic for this type of equipment: a massive bed is used as a base, and a saw frame is used as a cutting module. The cutting process itself is carried out by a saw blade (band saw), which is welded into a ring and mounted on a saw frame, by pulling on pulleys. The saw frame lowers under its own weight, and the adjustable hydraulic cylinder (hydraulic unloading) allows you to adjust the speed of lowering the saw frame, depending on the installed workpiece and sawing modes.

 

The advantages of manual metal band saws:

  • High machining accuracy due to guided guides with bearings - allows you to get a better cut compared to analogues from other manufacturers.
  • Saving material during processing, due to the small cutting width - allows you to save material, as well as produce accurate cuts due to minimal vibration of the band.
  • The ability to cut at different angles - up to 45 (60) ° - allows you to cut at different angles, for subsequent welding of structures.
  • Batch cutting, and cutting several workpieces at the same time - allows you to save processing time by sawing several workpieces in one setting.
  • The ability to cut various workpieces: pipes, profiles, etc. - makes the machine widely applicable both in small industries and workshops, as well as to mass-produce most of the materials used in production.

 

PROCESSING SCHEME:

STEEL PIPES METAL PROFILE METAL BAR
Cutting a pipe with a MetalTec BS100FM band saw Cutting a profile pipe with a MetalTec BS100FM band saw Circle cutting with MetalTec BS100FM band saw



DESIGN FEATURES:

Adjusting the position of the BS170FHE saw frame

ADJUSTING THE POSITION OF THE SAW FRAME

The lever for changing the angle of rotation of the saw frame is located on the front side of the machine.

Adjustable end stop for high dimensional accuracy when cutting.

Quick Tool Changer

QUICK TOOL CHANGE

The tension of the band saw blade is carried out by a convenient valve, the degree of tension is visible and controlled on a special indicator.

Reliable Mechanical Vise

RELIABLE MECHANICAL VICE

Provides reliable fixation of the workpiece due to the large surface area of ​​the corrugated jaws. The vise is set in motion by a convenient flywheel, which makes the fixing process fast and protects against arbitrary displacement of the workpiece.

Rigid and massive bed of the BS170FHE band saw

HARD AND HEAVY BED

The design of the machine is a reliable and rigid base (bed) on which a durable saw frame made of cast iron with a gear drive and a band saw blade is installed.

Hydrodischarge system image

HYDRAULIC UNLOADING SYSTEM

The lowering of the saw frame into the cutting zone of the workpiece occurs due to the own weight of the saw module, where the lowering speed is controlled by a hydraulic cylinder (hydraulic unloading).

Image of blade guides with bearings

DRIVERS WITH BEARINGS

Precise cutting on the machine is achieved by a perpendicularly mounted band saw blade, which is securely supported by long life ball bearings (integrated into guides on the saw frame).

Photo of revolving saw frame of MetalTec BS170FHE band saw

TURNING SAW FRAME

The solid saw frame made of gray cast iron provides structural rigidity and dampens vibrations that occur during operation.

The ability to rotate the saw frame makes working on the machine more convenient, saves space in the workshop.

Specifications
Delivery time Available in a warehouse in the Russian Federation
Часы работы New
Weight, [kg] 168
Characteristics Режет Ø 170 / 140 x 140 мм
Manufacturer MetalTec
Type Ленточнопильный

Наверх
×
Quick order