|Model||BS 228 FM|
|Motor power, W||230V; 50Hz; 1500w|
|380V; 50Hz; 1500 w (optional)|
|Saw blade dimensions, mm||3035 x 27 x 0.9|
|Cutting speed, m/min||25, 40, 51, 71 (60Hz)|
|21, 33, 42, 59 (50Hz)|
|Vise angle, °||0 - 45|
|Section of workpiece at – 90°, mm||
▇ 355 x 228
|Section of workpiece at -45°, mm||
▇ 152 x 228
|Table height, mm||635|
|Weight (net), kg||279|
|Weight (gross), kg||340|
Warranty: 1 year
The band saw MetalTec BS 250 FH is designed for cutting workpieces from metals: non-ferrous, nickel, titanium, as well as high-alloy and structural steels.
The design of the machine is classic for this type of equipment: a massive bed is used as a base, and a saw frame is used as a cutting module. The cutting process itself is carried out by a saw blade (band saw), which is welded into a ring and mounted on a saw frame, by pulling on pulleys. The saw frame lowers under its own weight, and the adjustable hydraulic cylinder (hydraulic unloading) allows you to adjust the speed of lowering the saw frame, depending on the installed workpiece and sawing modes.
The advantages of manual metal band saws:
|STEEL PIPES||METAL PROFILE||METAL BAR|
ADJUSTING THE POSITION OF THE SAW FRAME
The lever for changing the angle of rotation of the saw frame is located on the front side of the machine.
Adjustable end stop for high dimensional accuracy when cutting.
QUICK TOOL CHANGE
The tension of the band saw blade is carried out by a convenient valve, the degree of tension is visible and controlled on a special indicator.
RELIABLE MECHANICAL VICE
Provides reliable fixation of the workpiece due to the large surface area of the corrugated jaws. The vise is set in motion by a convenient flywheel, which makes the fixing process fast and protects against arbitrary displacement of the workpiece.
HARD AND HEAVY BED
The design of the machine is a reliable and rigid base (bed) on which a durable saw frame made of cast iron with a gear drive and a band saw blade is installed.
HYDRAULIC UNLOADING SYSTEM
The lowering of the saw frame into the cutting zone of the workpiece occurs due to the own weight of the saw module, where the lowering speed is controlled by a hydraulic cylinder (hydraulic unloading).
DRIVERS WITH BEARINGS
Precise cutting on the machine is achieved by a perpendicularly mounted band saw blade, which is securely supported by long life ball bearings (integrated into guides on the saw frame).
TURNING SAW FRAME
The solid saw frame made of gray cast iron provides structural rigidity and dampens vibrations that occur during operation.
The ability to rotate the saw frame makes working on the machine more convenient, saves space in the workshop.