Block-type screw compressor with dryer and filter IRONMAC IC 20/16 DF VX 500Lpower from 15 kW. The optimal choice in terms of price and quality for small enterprises and industries with a small machine park. This block compressor is essentially a ready-made solution for supplying air to a laser machine. The productivity will be sufficient for the operation of a laser machine, including if cutting is carried out with air.
Main advantages:
- Best price on the market
- Low noise level
- Easy maintenance and installation
- Enlarged radiator with forced cooling
- Full sound insulation + panel filter
- Quick-release covers with convenient locks
- Intuitive control panel translated into Russian
- 2 year warranty on all components
- Direct drive without coupling and motor without bearings
- The electrical cabinet is equipped with Schneider Electric components
Main Features:
Productivity, m3/min |
1.35 |
Power, kW |
15 |
Pressure, bar |
16 |
Dehumidifier |
included |
Receiver, l |
500 |
Noise level, dB |
63 |
Dimensions, mm |
1870x870x1850 |
Weight, kg |
675 |
STANDARD EQUIPMENT INCLUDES:
- Reviser 500l
- Compressor
- Dehumidifier.
- Set of filters for air preparation (MX, MY, MA)
Table of characteristics of air preparation filters for laser cutting:
Specification of filters included with the compressor
|
Filter type |
MX |
|
MA |
Particle separation more than, µm |
1 |
0.01 |
0.01 |
Residual oil content, mg/m³ |
0.5 |
0.01 |
0.003 |
Maximum temperature, ˚С |
80 |
80 |
25 |
Pressure drop, mbar |
80 |
100 |
80 |
- High-performance screw block of original design;
- Engine adapted for operation in a compressor;
- Direct drive of the screw block;
- Air cooling of compressor systems;
- Electronic control. Allows constant monitoring of the most important parameters. The screen allows you to monitor all data about the current state of the compressor, the timing of scheduled maintenance and other information;
- Oil tank with a separator filter ensuring the oil content in the compressed air is less than 3 mg/m3;
- Air filter with filtration degree 3 microns;
- Oil filter with filtration degree 10 microns;
- Minimum pressure valve;
- Safety valve;
- Case with easily removable panels;
- The frame is equipped with vibration pads;
- Factory oil filling.