Model | BS 180 FH |
Motor power, W | 750 (1 HP) |
Saw blade dimensions, mm | 2360 x 20 x 0.9 |
Cutting speed, m/min | 34, 41, 59, 98 (50Hz) |
41, 49, 69, 120 (50Hz) | |
Angle of rotation of the saw frame, ° | 0 - 45 |
Section of workpiece at – 90°, mm | ●180 ▇ 300 x 180 |
Section of workpiece at -45°, mm | ●100 ▇ 110 x 170 |
Table height, mm | 550 |
Power of coolant pump, W | 150 |
Dimensions: | |
Length, mm | 1260 |
Width, mm | 460 |
Height, mm | 1080 |
Weight (net), kg | 147 |
Weight (gross), kg | 175 |
PURPOSE:
The band saw MetalTec BS 100 FM is designed for cutting workpieces from metals: non-ferrous, nickel, titanium, as well as high-alloy and structural steels.
The design of the machine is classic for this type of equipment: a massive bed is used as a base, and a saw frame is used as a cutting module. The cutting process itself is carried out by a saw blade (band saw), which is welded into a ring and mounted on a saw frame, by pulling on pulleys. The saw frame lowers under its own weight, and the adjustable hydraulic cylinder (hydraulic unloading) allows you to adjust the speed of lowering the saw frame, depending on the installed workpiece and sawing modes.
The advantages of manual metal band saws:
PROCESSING SCHEME:
STEEL PIPES | METAL PROFILE | METAL BAR |
![]() |
![]() |
![]() |
DESIGN FEATURES:
![]() |
HARD AND HEAVY BED The design of the machine is a reliable and rigid base (bed) on which a durable saw frame made of cast iron with a gear drive and a band saw blade is installed. |
![]() |
HYDRAULIC UNLOADING SYSTEM The lowering of the saw frame into the cutting zone of the workpiece occurs due to the own weight of the saw module, where the lowering speed is controlled by a hydraulic cylinder (hydraulic unloading). |
![]() |
DRIVERS WITH BEARINGS Cutting accuracy on the machine is achieved by a perpendicularly mounted band saw blade, which is securely supported by extended life ball bearings (integrated into guides on the saw frame). |
![]() |
ROTATING MECHANICAL VICE Provides secure clamping of the workpiece due to the large surface area of the serrated jaws. The vise is set in motion by a convenient flywheel, which makes the fixing process fast and protects against arbitrary displacement of the workpiece. |